Pair of Voiders, RM riveted/punched, ID 6mm, natural finish
RM
En savoir plus
EVULF-55094
€229.90
Prêt à être expédié
Livraison sous 2 à 5 jours
Stock disponible : 8
Livraison sous 2 à 5 jours
Stock disponible : 8

Paiement
Achats en toute confiance,
100% sécurisé

depuis 2007
Société basée en France, Service client dédié

Livraison
Envoi sous 24H ouvrables, si Prêt à être expédié
Description Pair of Voiders, RM riveted/punched, ID 6mm, natural finish
RM Pair of Voiders, riveted/punched, ID 6mm, natural
- Very authentic and fully battle-ready -
This type of arm protection was used during the late Middle Ages and was usually sewn or knotted to the garments (gambesons).
Delivery includes two voiders, one for each arm.
The RM chain maille type is composed of small rings with an inner diameter of 6 mm only. As per original finds, it is woven with alternate rows of riveted round rings (domed rivet heads) and punched flat rings. Both then and now, the extremely small inner ring diameter has made it possible to manufacture this particular chain mail out of 1 mm steel without impairing its effectiveness, and thereby to achieve a weight reduction of about 30 - 35%. The common abbreviation for this particular weave is RM (Roman Mail), as it was favoured by the ancient Celts and Romans (Lorica Hamata). However, it remained in use throughout the ages and was commonly worn up to the late Middle Ages.
Details:
- Length: approx. 65 cm
- Arm length: approx. 46 cm
- Height: approx. 34 cm
- Inner diameter: approx. 6 mm
- Flat rings: approx. 1.8 mm width
- Finish: natural (lightly oiled)
- Weight: approx. 3.3 kg
This is an original ULFBERTH® product.
- Very authentic and fully battle-ready -
This type of arm protection was used during the late Middle Ages and was usually sewn or knotted to the garments (gambesons).
Delivery includes two voiders, one for each arm.
The RM chain maille type is composed of small rings with an inner diameter of 6 mm only. As per original finds, it is woven with alternate rows of riveted round rings (domed rivet heads) and punched flat rings. Both then and now, the extremely small inner ring diameter has made it possible to manufacture this particular chain mail out of 1 mm steel without impairing its effectiveness, and thereby to achieve a weight reduction of about 30 - 35%. The common abbreviation for this particular weave is RM (Roman Mail), as it was favoured by the ancient Celts and Romans (Lorica Hamata). However, it remained in use throughout the ages and was commonly worn up to the late Middle Ages.
Details:
- Length: approx. 65 cm
- Arm length: approx. 46 cm
- Height: approx. 34 cm
- Inner diameter: approx. 6 mm
- Flat rings: approx. 1.8 mm width
- Finish: natural (lightly oiled)
- Weight: approx. 3.3 kg
This is an original ULFBERTH® product.